Main Menu
Your Cart

Naraku

Brand: Naraku Model: NK200.01
Description: Naraku V.3 carburetor 18.5mm for 50cc 4-stroke scooters. Naraku quality at an affordable price. Unlike most Chinese alternatives that have start issues, the Naraku V.3 carburetor has a good drive. Prevents flat spots and allows you to conveniently drain the float bowls. Complete with E-..
$69.00
Brand: Naraku Model: NK200.06
Description: Naraku 24mm pressure-controlled tuning carburetor. 24mm intake for 85cc+ cylinders with relevant sized heads. E-choke and 102 Main Jet, with 42mm air filter connection. No accelerator pump to prevent over oiling. Great for a performance increase on 85-180cc 4-stroke engines. Supplied je..
$84.00
Brand: Naraku Model: NK700.13
Description: Naraku Racing Carburetor 30mm for GY6 125/150cc 4-stroke scooters. Includes auto choke. Throttle cable layout on the side. Build height corresponds with the original. This carb will help your performance engine breathe easier and goes well with a big-bore cylinder. Air filter connection..
$114.00
Brand: Naraku Model: NK200.02
Description: Naraku Racing Carburetor High-Performance 30mm for GY6 125/150cc 4-stroke scooters. Includes auto choke. Throttle cable layout on the side. Build height corresponds with the original. This carb will help your performance engine breathe easier and goes well with a big-bore cylinder. Air ..
$179.95
Brand: Naraku Model: NK950.01
Description: The Naraku Performance 107mm Scooter Sport Clutch works on both two-stroke and 139QMB 49cc-50cc 4-stroke GY6 50 engine based scooters, ATVs, and off-road karts. Also, fit Honda Dio/Elite and Honda GET only with conversion secondary pulley assembly. This is one of the most..
$64.95
Brand: Naraku Model: NK900.56
Description: Naraku Clutch Bell clutch bell/drum for 139QMB 49cc-50cc 4-stroke GY6 50 engine based scooters, ATVs, and off-road karts. Also, fit Honda Dio/Elite and Honda GET only with conversion secondary pulley assembly.Naraku High-Performance clutch bell with a patented R-Vent syst..
$57.00
Brand: Naraku Model: NK900.63
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings..
$14.95
Brand: Naraku Model: NK900.64
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 1500rpm spring. Markings..
$14.95
Brand: Naraku Model: NK900.65
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings ..
$14.95
Naraku Compression Spring Set (DIO, GET, QMB) Naraku Compression Spring Set (DIO, GET, QMB)
4 - 10 Days
Brand: Naraku Model: NK900.50
Description: Naraku Compression Spring aka torque spring does a couple of things. First, they supply the pressure to engage the belt. They also determine the rate at which the CVT transmission changes from low to high gear. A 1000rpm spring will go into a higher gear than a 2000rpm spring. Markings ..
$39.95
Brand: Naraku Model: NK101.70
Description: Naraku Crankshaft Needle Bearing 17x12x13mm for Honda DIO and Honda Elite. OEM Replacement Naraku Crankshaft Needle Bearing 17mm (OD) x 12mm (ID) x 13mm (W) and cage assemblies for the crankshaft and piston pins for Honda Dio (AF16-AF18E) engines. OEM quality small end bearing (17x12x13..
$15.95
Brand: Naraku Model: NK900.05
1P39QMB shortcase / Tire Size 3.50-10" RimDescription: Naraku Brand Premium CVT Drive Belt size 669x18x30 are made in Taiwan, not China version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet its flexible not harsh on aluminum driveface like "Kevlar" which ..
$26.53
Brand: Naraku Model: NK900.54
Description: Naraku Brand Premium CVT Drive Belt size 729x18x30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-r..
$26.53
Brand: Naraku Model: NK900.73
Description: Naraku Brand Premium CVT Drive Belt size 743-20-30 is made in Taiwan, not China's version. Standard fit for GY6 150cc 4-stroke ATVs and Street Scooters with a 10-inch rear wheel shortcase engine.NOTE: Another way to determine if you have a GY6 shortcase or longcase engine? If it has 10 ..
$29.95
Brand: Naraku Model: 137-24
Description: Naraku Brand Premium CVT Drive Belt size 788x18x30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are recommended for heavier duty off-r..
$26.53
Brand: Naraku Model: NK900.72
GY6 longcase length: 17-7/8 inches Description: Naraku Brand Premium CVT Drive Belt size 835-20-30 is made in Taiwan, not China's version. Its material used is Nylon previously used in making bullet-proof vests. Nylon strong yet it's flexible, not harsh on aluminum drive face like "Kevlar" which are..
$29.95
Naraku CVT KIT (139QMB, Buddy, RoughHouse) Naraku CVT KIT (139QMB, Buddy, RoughHouse)
4 - 10 Days
Brand: Naraku Model: KIT.A.139QMB
Description: Complete Naraku CVT Kit 139QMB aka Super CVT transmission kit for GY6 50cc engines, all tuned to another. Since Chinese-built scooters are not upgraded with top-end components out of the factory, this is the easiest way to overhaul the transmission without expert help. This negates any ..
$204.00
Brand: Naraku Model: KIT.A.139QMB.L
Description: Naraku CVT KIT ECO(nomy) 139QMB aka Performance CVT transmission kit for GY6 50cc engines, has all major performance parts to tuned your CVT\transmission. Since Chinese-built scooters are not upgraded with top-end components out of the factory, this is the easiest way to overhaul the tr..
$124.95
Brand: Naraku Model: NK600.02
Description: High-Quality Naraku Cast-Iron Cylinder 63mm 180cc with Cast Aluminum Piston for GY6 125/150cc + engines. The cylinder bore is 63mm. Naraku 63mm Cylinder Big Bore Kit is suitable for all air-cooled 4 stroke 125-150cc Kymco engines (scooters), and most Chinese imported vehicles 125/150cc ..
$94.00
Brand: Naraku Model: NK600.02F
Description: High-Quality Naraku Cast-Iron Cylinder 63mm 180cc with Forged Aluminum Piston offer better durability and reduced friction for GY6 125/150cc + engines. The cylinder bore is 63mm. Naraku 63mm Cylinder Big Bore Kit is suitable for all air-cooled 4 strokes 125-150cc Kymco engines (scooters..
$162.00
Brand: Naraku Model: 137-10
Description: Naraku Cylinder Head Wear-Resisting 2 valves with a larger 27.5 intake / 23 exhaust ports will allow your GY6 cylinder to breathe better! Works great with Naraku Cylinder 63mm 180cc Big Bore Kit w/Forged Piston. When changing a cylinder kit or an exhaust, it's a clever idea to pick..
$133.00
Brand: Naraku Model: NK101.86
Description: These Naraku replacement cylinder stud nuts work with many scooter cylinder big bore kits. The nut length allows for solid mounting of the cylinder top-end system, in a way that standard nuts cannot. These nuts can be used for other purposes. Commonly used in Minarelli, Kymco, MBK, Yama..
$8.95
Brand: Naraku Model: NK100.52
Description: High-Quality Naraku Cast-Iron Cylinder 52.4mm 94.9cc with Forged Aluminum Piston offer better durability and reduced friction for 139QMB 49/50cc + engines. The cylinder bore is 52.4mm. Naraku Cylinders' Combo 52.4mm 94.9cc 2V w/Cast Piston including the following parts Naraku 52.4mm (94..
$223.95
Brand: Naraku Model: NK900.59
Description: Naraku Drive Face HS-CNC V.2 for 139QMB 49cc-50cc scooter engines. V.2 is the latest version of the CNC-machined drive face pulley from Naraku. This enhanced version now allows you to mount the original variator fan overlay and kickstart star him (See Fig. 3), the edge angle was revised..
$34.95
Naraku Exhaust Performance Crossover Black Carbon (139QMB) Naraku Exhaust Performance Crossover Black Carbon (139QMB)
4 - 10 Days
Brand: Naraku Model: NK400.01
Description: The NARAKU crossover combines Racing design with an internal structure that is tailored to the requirements of 4-stroke engines. Road legal thanks to E-certification. Most 4-stroke exhausts are just borrowed from 2-stroke series and only the brackets have been altered. The result is a v..
$165.00
Showing 1 to 25 of 35 (2 Pages)