Main Menu
Your Cart

Malossi Clutch Maxi Delta (GY6, PCX)

Malossi Clutch Maxi Delta (GY6, PCX)
Malossi Clutch Maxi Delta (GY6, PCX)
Malossi Clutch Maxi Delta (GY6, PCX)
Malossi Clutch Maxi Delta (GY6, PCX)
Malossi Clutch Maxi Delta (GY6, PCX)
Malossi Clutch Maxi Delta (GY6, PCX)

Description: Malossi Clutch Maxi Delta for use in GY6 125cc-150cc+, Honda PCX 125-150cc (2010 and newer), and many others. This clutch features a spring preload adjustment that allows you to fine-tune the RPM at which the arms release and engage.  To adjust the preload, you loosen the Allen bolt and shift the indexed spring retainer plate in the direction you want.  Shifting it to the right loosens tension on the spring and allows the clutch to engage at a lower RPM.  Shifting it to the left increases the tension on the spring, meaning the clutch needs to spin at a higher RPM in order to engage. It weighs 1054 g and has an inner brace.  The pads measure 48mm x 23mm.

Installation: 1. Slack the belt by opening the CVT clutch gives belt slack to the variator side. 2. Then install the variator drive face while lifting the slack belt further away from the center boss if done properly should not see any splines between variator drive face slop-side and boss flat-side. Should be flushed together. 3. Then install the existing variator fan, washer, and hand-tight nut. 4. Finally, apply blue Loctitetorque nut to 30-35ft-lbs. For reassurance please consult your manufacturer's variator torque specs.

Specifications:

Includes the following Clutch housing, Clutch springs, and Clutch weights.

•    1x Clutch ID: 24.3<28mm / OD: 120mm / H: 35.4mm
•    3x Clutch Springs (blue): 1000 RPM
•    3x Clutch Weights (gray): 48x23mm
•    Made in Italy
•    Fit Clutch Nut: M28 / Socket: 39mm
    Fit Clutch Shaft Nut: M10 / Washer: M10 Socket: 19mm (GY6 ONLY)
    Fit Clutch Shaft Nut: M12 / Washer: M12 / Socket: 17mm (PCX ONLY)
•    Fit Belt Size: 743835842x20x30 (Fit GY6 ONLY)
•    Fit Belt Size: 816836x22x30 (Fit PCX ONLY)
•    Fit Clutch Springs: 1k1.5k2k rpm
•    Fit Compression Spring: 1k1.5k2k rpm
•    Fit Dowel Pin Set (8x10mm)
•    Fit GY6 125/150cc+

Supported Models: NCY CVT KIT (Part# 1200-1048); GY6 152QMI 157QMJ 161QMK 161QML Chinese Scooter, ATV, Genuine Buddy, Kymco, Polaris RZR 170, Honda PCX 125/150cc (2010 and newer), Ruckus, Vento

-----
Item Weight & Product Dimensions:
•    2.323 pounds | 4.795" (L) x 4.795" (W) x 1.450" (H)

Write a review

Note: HTML is not translated!
Bad Good
Captcha
Malossi Clutch Maxi Delta (GY6, PCX)
  • Stock: 40
  • Reward Points: 6
  • Part #: 5212487
Sold: 0
Views: 155
$159.95
Price in reward points: 160

Included