Main Menu
Your Cart

Studs


Cylinder Head & Cam Unit Attribute:
1.    Camshaft Holder
2.    Cylinder Head
Cylinder Head 58.5mm (2 valves)
Cylinder Head 61mm  (2 valves, Big Valve)
Cylinder Head 61mm (2 valves)
3.    Cylinder Head Gasket
4.    Dowel Pins 10x14
5.    Intake Manifold
6.    Intake Manifold Assembly
Intake Manifold EGR 30mm (coated)
Intake Manifold Non-EGR 28mm (coated)
Intake Manifold Non-EGR 28mm (polished)

7.    Intake Manifold Clamp
8.    Intake Manifold Gasket
9.    Intake Manifold Spacer
10.    M6 Nuts
11.    M6x100 Bolts
12.    M6x32 Studs
13.    M6x50 Studs
14.    M8 Nuts
15.    M8 Washers
16.    O-ring 10x1.8
17.    O-ring 27x2
18.    Spark Plug¬
19.    Valve Guides


Scooter engine studs.

Brand: 101-Octane Model: IP13864
Description: These 101-Octane replacement exhaust studs plus nuts work with many scooter exhaust and cylinder big bore kits. The nut length allows for solid mounting of the exhaust system, in a way that standard nuts cannot. The set includes two exhaust studs and two exhaust nuts.NOTE: Shorter threa..
$8.95
ComposiMo CVT Cover Spacer Concave Contour (GY6)
Non-Stock
Brand: ComposiMO Model: CMO_2_0350
Description: Do you have a ComposiMo Anklebiter (or any similar ankle-biter) GY6 CVT open cover on your scooter? Check out these new CVT Cover Spacers! Everyone uses the same boring straight aluminum spacers... but now there are new concave contour spacers, and able to make our CVT cover spacer what..
$2.70
G- Cylinder Stud 168mm 2V (139QMB) G- Cylinder Stud 168mm 2V (139QMB)
4 - 10 Days
Brand: G Model: 151-134
Description: Cylinder Stud 168mm 2-Valve for 139QMB 49/50cc 4-stroke engines.NOTE: Long thread screw into the crankcase, the shorter thread is nutted. Recommended apply blue Loctite and torque no more than 6 ft-lbs max. on these 7mm studs. For assurance please consult your manufacturer's..
$1.99
Brand: G Model: 151-133
Description: Cylinder Stud 176mm 2-Valve for 139QMB 49/50cc 4-stroke engines.NOTE: Long thread screw into the crankcase, the shorter thread is nutted. Recommended apply blue Loctite and torque no more than 6 ft-lbs max. on these 7mm studs. For assurance please consult your manufacturer's..
$1.99
Brand: G Model: TH52ADIO-105
Description: Cylinder Studs 105mm 2-Valve Set for Honda Dio/Elite 50cc engines.NOTE: THIS IS NOT FOR EARLY MODEL (PRE-1994) AF05E Engines. Recommend apply blue Loctite and torque no more than 5 ft-lbs max. on these 6mm studs. For assurance please consult your manufacturer's torqu..
$14.95
Brand: G Model: TH52ADIO-120
Description: Cylinder Studs 120mm 2-Valve Set for Honda Dio/Elite 50cc engines especially made for the 81cc Taida Liquid Cylinder Kit (DIO-060-CH50). Include 4 studs and nuts.NOTE: THIS IS NOT FOR EARLY MODEL (PRE-1994) AF05E Engines. Recommend apply blue Loctite and torque no more than 5 ..
$14.95
Brand: G Model: TH52ADIO-130
Description: Cylinder Studs 130mm 2-Valve Set for Honda Dio/Elite 50cc engines especially made for 120cc Taida V2 Liquid Cylinder Kit (DIO-060-CH54). Include 4 studs and nuts.NOTE: THIS IS NOT FOR EARLY MODEL (PRE-1994) AF05E Engines. Recommend apply blue Loctite and torque no more than 5 ..
$14.95
Brand: G Model: TH52ADIO-150
Description: Cylinder Studs 150mm 2-Valve Set for Honda Dio/Elite 50cc engines.NOTE: THIS IS NOT FOR EARLY MODEL (PRE-1994) AF05E Engines. Recommend apply blue Loctite and torque no more than 5 ft-lbs max. on these 6mm studs. For assurance please consult your manufacturer's torqu..
$14.95
Brand: G Model: 1100-4004
Description: G- Standard Cylinder Studs 2-Valve Set for 139QMB 49cc-88cc. Includes 2 short studs at 168mm and 2 longer studs at 176mm. Set of 4 studs.NOTE: Long thread screw into the crankcase, the shorter thread is nutted. Recommended apply blue Loctite and torque no more than 6 ft-lbs max. on th..
$17.99
Brand: G Model: 164-136
Description: Cylinder Studs 187.5mm 2V Set for GY6 125/150cc 4-stroke engine. Includes 2 short studs at 187.5mm.NOTE: The long thread screw into the crankcase, the shorter thread is nutted. Recommended apply blue Loctite and torque no more than 7 ft-lbs max. on these 8mm studs. F..
$9.95
Brand: G Model: 164-137
Description: Cylinder Studs 195.5mm 2V Set for GY6 125/150cc 4-stroke engine. Includes 2 longer studs at 195.5mm.NOTE: The long thread screw into the crankcase, the shorter thread is nutted. Recommended apply blue Loctite and torque no more than 7 ft-lbs max. on these 8mm studs. ..
$9.95
Brand: G Model: 165-41
Description: Cylinder Studs 208mm 2V Set for GY6 150cc 4-stroke ZNEN engines commonly found in Lance Phoenix, Flyscooters Cadenza, ZNEN ZN150T-18, Xingyue ITA-150, Motorino Cassini, CMS Prodigy, BMS Pathfinder, and many more.NOTE: The long thread screw into the crankcase, the sho..
$9.95
Brand: G Model: 190-54
Description: These replacement exhaust studs plus nuts work with many scooter exhaust and cylinder big bore kits. Set includes two exhaust studs and two exhaust nuts.NOTE: Shorter thread screw into the cylinder head, longest thread is nutted. Also, available in separate sets G- Exhaust Studs 6mm Set..
$4.60
Brand: G Model: 148-118
Description: These replacement 6mm exhaust studs work with many scooter exhaust and cylinder configurations. Set includes two exhaust studs.NOTE: Shorter thread screw into the cylinder head, longest thread is nutted. Recommended apply blue Loctite and torque no more than 5 ft lbs max. on these 6mm s..
$2.99
Brand: G Model: 175-8
Description: These replacement 8mm exhaust studs work with many scooter exhaust and cylinder big bore kits. Set includes two exhaust studs.NOTE: Shorter thread screw into the cylinder head, longest thread is nutted. Recommended apply blue Loctite and torque no more than 7 ft lbs max. on these 8mm st..
$3.99
Brand: G Model: 1100-1068
Description: These replacement 6mm intake studs work with many scooter intake manifold and cylinder configurations. Set includes two intake studs.NOTE: Shorter thread screw into the cylinder head, longest thread is nutted. Recommended apply blue Loctite and torque no more than 5 ft lbs max. on these..
$2.99
Brand: G Model: 175-13
Description: These replacement 6mm intake studs work with many scooter intake manifold and cylinder configurations. The set includes two intake studs. NOTE: Shorter thread screw into the cylinder head, the longest thread is nutted. Recommended apply blue Loctite and torque no more than 5 ft-lbs max..
$3.99
Brand: G Model: 175-20
Description: Intake Studs M6x85mm Set for 139QMB 49/50cc, GY6 125/150cc Engines. 85mm Shaft Length used to bolt the intake manifold to the cylinder head in 150cc GY6B 4-stroke ZNEN engines. May also be used in other applications. NOTE: Shorter thread screw into the cylinder head, the..
$2.95
Brand: G Model: 140-16
Description: Installing a replacement cylinder head or 6mm diameter studs? These nuts are essential. Set includes two stud acorn nuts.NOTE: Also available complete G- Exhaust Studs +Nuts 6mm or 8mm Set (Part# 190-54). Specifications:Includes the following acorn nut set.•    2x Stainl..
$1.99
Brand: MotoForce Model: MF96.90036
Description: These MotoForce replacement exhaust studs work with many scooter exhaust and cylinder big bore kits. It may sometimes be harder get to mount an exhaust using conventional M6 bolts with different thread length. Installing these studs with equal thread length makes things a lot easier dea..
$6.95
Brand: Naraku Model: NK101.97
Description: Cylinder Stud 110mm 2-Valve for CPI, Keeway, Kymco, MBK, Minarelli, Yamaha 49/50cc 2-stroke engines. Naraku cylinder stud for horizontal Minarelli and Minarelli-based cylinders. Great as a replacement for broken or damaged stud.NOTE: Recommend apply blue Loctite and torque no ..
$6.95
Brand: Naraku Model: NK101.86
Description: These Naraku replacement cylinder stud nuts work with many scooter cylinder big bore kits. The nut length allows for solid mounting of the cylinder top-end system, in a way that standard nuts cannot. These nuts can be used for other purposes. Commonly used in Minarelli, Kymco, MBK, Yama..
$8.95
Brand: Naraku Model: NK101.84
Description: Cylinder Studs 110mm 2-Valve Set for CPI, Keeway, Kymco, MBK, Minarelli, Yamaha 49/50cc 2-stroke engines.NOTE: Recommend apply blue Loctite and torque no more than 5 ft-lbs max. on these 6mm studs. For assurance please consult your manufacturer's torque specs.Specifi..
$14.95
Brand: Naraku Model: NK101.91
Description: These Naraku replacement exhaust studs plus nuts work with many scooter exhaust and cylinder big bore kits. The nut length allows for solid mounting of the exhaust system, in a way that standard nuts cannot. The set includes two exhaust studs and two exhaust nuts.NOTE: Shorter thread sc..
$8.95
Brand: NCY Model: 0500-1037
Description: Installing a big valve head or 8mm diameter studs? These nuts are essential. The set includes two exhaust nuts.NOTE: Also available complete NCY Exhaust Stud +Nuts Set (Part# 0500-1036/7).Specifications: Includes the following Exhaust nut set.•    2x Stainless Steel Nut L..
$3.99
Showing 1 to 25 of 48 (2 Pages)